SNUCONE  Co.,  LTD. SNUCONE  Co.,  LTD.  was  established  as  Jin- Heung dental industrial Inc. in 1997. Since then, it has tried hard to develop innovative  alloy  manufacturing  technology,  upgrade  production  facilities, diversify the products, and produce high quality products.

In  order  to  fulfill  the  customers’  needs,  we  have  been  doing  unrelenting studies. Also,  we  have  developed  our  business  both  in  domestic  and international markets.

In 2005, we entered in the field of dental implants and started the company we  have  become  today,  specializing  in  dental  implants  through  bold research  and  development  (R&D)  investments  and  advanced  technology transfers.  We  will  keep  up  the  pace  with  this  ever-growing  challenge  and aim at producing only the highest quality products. We really care about our customers and we promise to work very hard to offer you the best products and services.

SNUCONE has  established  partnerships  with specialized  research  Institutes,  universities, hospitals,  to  cooperate  on  experiments  and clinical  studies  to  develop  ever  more  effective products.

SNUCONE promotes better quality and better technology in implants and prosthetic components financing research and  technology  development  at  leading  Universities of  Dentistry,  Dental  Hospitals  and  Institutes  and  other research networks.

SNUCONE has an extensive Implant dentists’ network with vast clinical experience, capacity to support and develop colleagues and to foster best quality, best technology and research and development in Implantology.

S.L.A Surface treatment
SNUCONE  treats  its  fixtures  using  Grid  Blasting  and Etching  on  the  surface  of  Grade  4  Titanium.  Since the  results  of  this  treatment  are  heavily  influenced  by temperature, time and procedure, perfect technical skills and quality checking are required.

Download Brosur

AF+B/ AF+II Type :AF+I Type :AF+I Type :Certificate :

• AF+B fixture Designed to be none coated surface at top of the fixture.
• AF+II fixture Designed to be full coated surface at top of fixture.
• The best S.L.A surface treatment obtained through technology transferred from Germany. • In the Lower Jaw, it can be loaded as early as 6 weeks after implantation.
• In the Upper Jaw, it can be loaded as early as 10 weeks after implantation.
• Submerged-type fixture with internal hex and 11° morse taper conical connection.
• Another characteristic of the AF+B fixture is the absence of a thread for 0.7mm at its upper section, this prevents penetration of bacteria and improves the stress distribution in the coronal area.
• This type of fixture has an exceptional initial stability, which helps to reduce the time to loading.
• Recommended insertion torque : under 30 Ncm

• The best S.L.A surface treatment obtained through technology transferred from Germany.
• Submerged-type fixture with internal hex and 11° morse taper conical connection.
• AF+I uses a revolutionary concept to improve primary stability in soft bone and or (especially) in the upper jaw.
• All the fixtures (except the 3.5mm) have the same core diameter of 3.35mm (2.8mm) and a progressive thread design.
• This type of fixture has a convergent shoulder that preserves the cortical bone and maximizes the long term aesthetics.
• Recommended insertion torque : under 30 Ncm

• The best S.L.A surface treatment obtained through technology transferred from Germany.
• Submerged-type fixture with internal hex and 11° morse taper conical connection.
• AF+I uses a revolutionary concept to improve primary stability in soft bone and or (especially) in the upper jaw.
• All the fixtures (except the 3.5mm) have the same core diameter of 3.35mm (2.8mm) and a progressive thread design.
• This type of fixture has a convergent shoulder that preserves the cortical bone and maximizes the long term aesthetics.
• Recommended insertion torque : under 30 Ncm